Beijing Dongke United Technologies Co.,Ltd.
Water reducing agents are aggregates in which fine grained stones are no longer degradable and can reduce the mixed water content. Most of them are anionic surfactants such as lignosulfonate, naphthalene sulfonate formaldehyde polymer and so on. When added to concrete mixtures, it has the effect of reducing cement particles, increasing its activity, reducing the accumulation of drinking water and improving the water flow of the aggregates.
To reduce cement or save cement unit consumption. They are usually classified according to their chemical composition: lignosulfonate superplasticizer, naphthalene superplasticizer, melamine superplasticizer, sulfamatus superplasticizer, fatty acid superplasticizer, polycarboxylate superplasticizer.
In the early 1960s, the first generation of superplastic-based plastics and melamine-based superplastic resins were developed. In the 1930s they developed superplasticizers. Lignin sulfonate is also called a superplasticizer because it represents expansion. It is a second generation sulfamed superplasticizer, although chronologically it is only a second generation superplasticizer – third generation polycarboxylate.
Graft copolymers containing sulfonic acid rings and the original carboxylic acid groups are superplastic and effective for three generations. The water drop rate of the superplasticizer is more than 20%. The main chain is naphthalene, melamine chain and therefore the water-soluble reducing agent, of which the naphthalene series is the most important, 67%.
Especially in my country, most of the superplastic than naphthalene as superplasticizers, the main raw material is naphthalene. The Naphthalene superplastic series is the most used and widely used superplasticizer in my country (over 70% of the superplasticizer volume). They vary in programming time, are complicated in the combination of blocks, and are inexpensive with a wide variety of components and prices. Naphthalene-based water additives are commonly used to make stones with high fluidity, high strength and good strength.
The damage was accelerated by adding naphthalene to the water to reduce the reducing agent. In addition, some naphthalene -based superplasticizers are required to have a similarity to cement production.
Welcome to leave a message on this site.
You can also contact us on Alibaba:https://www.alibaba.com/product-detail/polycarboxylate-based-ether-superplasticizer-superplasticizer-liquid-_1700001654169.html?spm=wending.topranking_multi_creative_list.0.0.744a3e5fsMUrxN
High range water reducer reduces the water content of the mixture in situations where rock deformation is of equal importance. A mixture mixed with water was reduced to less than 15%, while the broken stone remained uniform.
Superplastic has a positive effect on the cracking properties of mortar, which leads to greater impact of cement and mortar, reducing water content and improving mortar performance. However, some superplasticists cause bleeding and damage, and if the dose is too high, it can cause bleeding.
High range water reducer can never change the location of the room. If the dose is too high (overdose), it has little effect, but it does not increase the initial strength of the hard stone. Reduce water consumption and increase concrete strength for all ages. By maintaining constant strength, 10% or more of cement can be saved. The chloride ion concentration is significant and does not damage the metal strip.
In addition to the penetration, protection and corrosion of the rocks, it also increases the strength of the rocks. Superplastic polycarboxylate combs have a special structure, which promotes the cracking of cement particles by electrostatic effects and the sterile screw effect, increases the performance of the concrete mix, reduces water consumption and installs various stone materials.
Adjust frost resistance and permeability of rocks, including compressed, distracting, bending and elastic modules; The stone laying time can be adjusted by improving the quality of the stone; At the same time, it can reduce bleeding, improve kidney retention, and other effects can make the kidney last longer. Its effectiveness is 0.1% to 0.2%, fast dispersion of polycarboxylate superplasticizer, low cost, small stone loss, similar to different types of cement, obvious delay.
Polycarboxylate superplasticizer is a chemical additive commonly used in concrete engineering to improve the performance of concrete. Polycarboxylate water-reducing agent is a new type of high-efficiency water-reducing agent among concrete additives.
A cement superplasticizer, also known as a superplasticizer for cement, is a type of chemical admixture that is specifically designed to improve the performance and workability of cement-based materials, such as concrete and mortar.
Water-reducing polycarboxylic acid is an effective water-reducing agent and cement dispersant in cement concrete. It is widely used in highways, bridges, embankments, tunnels, skyscrapers and other projects.
polycarboxlate plasticizer is a polymer material additive widely used in industrial production, also known as polycarboxlate plasticizer. Any substance added to polymer materials that can increase the plasticity of the polymer is called a polycarboxlate plasticizer.
Concrete admixture refers to a variety of substances that are added to concrete during its mixing phase to enhance certain properties or characteristics.
Polycarboxylate (PCE) is a remarkable polymer with excellent water-reducing efficiency, dispersibility, and compatibility. Its versatility and wide-ranging applications in construction, immersion products, textiles, and various other industries make it a vital component in enhancing material properties and performance.
